OK, On the pigtail side there are 7 wires, 1 white w/ black stripe(comes from engine kill switch with one of the next 2), 1 black, 1 gray, 2 red (one has constant voltage and the other only has voltage when trying to start), 1 dark blue & 1 light blue (whenever it touches voltage wire it turns the starter). The remote start wires are as follows (looking into the connector starting in upper left corner), Row 1; pin 1 gray, pin 2 pink, pin 3 yellow. Row 2; pin 1 red (goes to fuse then into alarm box), pin 2 blue, pin 3 yellow. Row 3; pin 1 black, pin 2 open/no wire, pin 3 orange. Hope this is enough info.
|