Quote:
Originally Posted by Miamieddie
The top part of your plug shaped like an elbow looks like the heat exchange is at mid point. That's good. The black on base ring goes completely around the ring that's good. Now if your buggy is running good although the porcelain looks white your probably fine. But for safety sake try a bigger main jet and see what happens. If it adds color but acts up put back the jet you just removed and leave it. If it adds color and runs good then that's even better. But don't touch anything else. It all looks good.
|
I should try the bigger main, just lacking the motivation to do it again. Appreciate the input. I was thinking the plug looked god else wise too.