What I have is an 18 tooth sprocket reverse gear box compatible with a 40, 41, or 420 chain.
What I need is to substitute a 16 tooth sprocket that matches the inner diameter of the 18 tooth sprocket and has the same bolt circle and is for a 530 chain.
Have one 16 tooth sprocket being shipped after carefully going over dimensions with sales. Will there be any further problems ? Besides the spacer issue between the case and gear box which will require minor modification to ensure proper alignment of chain from drive to axle.
Here is the new gear box I have;
[img]http://www.*************/assets/images/200680.jpg[/img]
Here is the sprocket I will be using;
It is a new replacement engine that has been waiting for the right moment to go in along with a host of other parts that I have been collecting to put in there. Only when I had everything on hand and prior mods done (welding, etc...) did I begin the journey of assembly. Now I've taken a detour and learned a somewhat expensive lesson in buying Chinese parts.
Will include pics once downloaded from phone.