[JERSEYDEVIL]

there is a round indent on the side of the cover where a kickstarter would go through. normally that is where they put the exhaust mounts on the buggies. it looks like you do not have a hole there. i would drill it a 1/2" and use a long 1/2" bolt as the hanger. stick the bolt through the hole (head inside, threads out). i would use a bolt w/ no shoulder that has threads all the way up. use a nut to keep it stout to the cover. then youll have to make a bracket that bolts to your exhausts existing holes and drill a hole for the new stud to go through use washers or something to fill the gap between the nut you put on the outside of the cover to the exhaust bracket you made. throw a nut on the outside and tighten it up.