Quote:
Originally Posted by SYCARMS
There are 2 bolts with 10mm heads. One is on the very bottom and one is on the side. Bottom to drain and side to fill. Pull both plugs to drain. They can also be identified by either an aluminum or red color sealing washer under bolt. If you take your time pulling the final drive cover you can save the gasket. If you tear the gasket use a new one, do not use gasket maker for it will eventually leak and if not caught you will run the final drive empty or with inefficient lube.
|
Thanks for the helpful info, and I planned on picking up a gasket from BD anyway...