I had problems with mine, bogging, stalling, jetting and re-jetting. I found that the rubber connector from the intake to the carb had torn. When the buggy was still it kept together and didn't leak, but once i started moving it would flop all over. I cut a length of 1-1/4 radiator hose, loosend it up in boiling water and slipped it on the carb and intake. I think I'm running similar jetting at sea level, here in MA. It seems to rip...
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit
2014 Kandi 90B
|