Thread: loose wires
View Single Post
  #2  
Old 01-12-2014, 12:33 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

First, what brand buggy is it? The engine will run without the battery, it has a magneto. The battery not charging could be due to either a bad regulator, Stator, or battery itself. The first pic is correct it has a DCV cdi which uses 2 less wires than the ACV cdi. The second picture the grn/wt wire looks as if it broke at the terminal just look in the general area and you should see the other broken half. The blu/wt wire goes to the trigger switch in the stator. Find where wraped wires come up out of the engine case right passenger side engine and just trace to find the break. I couldn't tell if there is a blunt end crimp which is used on extra wires that carry a current or if it has a broken terminal.The last pic I believe that to be an extra ground for some acessory. If that bl/wt. wire is indeed broken the engine will not start for it won't get spark.
Reply With Quote