Ok, so I'll give you some background first.
ASW Zircon. Stock except for high flow filter.
Sat unused for 2 years
clear fuel lines, vacuum style petcock works great.
new filter
brand new 24mm carb
new plug
fresh gas
No vacuum leak that I can find.
Here is my problem. The buggy starts and idles fine. The buggy does great on the top end and all points in between. When I am driving on the trails everything is good until I hit the brakes and lock up the rear wheels. When I hit the brakes, 9 times out of 10 the buggy will stall and die. It won't start easily again unless I give it a small bit of throttle. Then it starts and accelerates fine. Thought maybe the 20 dollar carb was junk, so I rebuilt the tamper proof stocker. buggy still dies. I have tried all kinds of different idle speed settings. The buggy did not do this prior to the 2 years of inactivity. Any ideas? (Please tell me I need an A9 cam, big bore kit, higher compression, ported big valve head and aftermarket exhaust,bigger carb, a turbo, and nitrous. All running on methanol LOL...! just kidding around. For now
)