View Single Post
  #12  
Old 03-09-2011, 04:05 PM
dkelley5 dkelley5 is offline
Lurker
 

Join Date: Mar 2011
Posts: 10
Default

Quote:
Originally Posted by SYCARMS View Post
The voltage you got at the battery with engine running shows the system is charging. I'm not sure of exactly where you are checking to get the 4.5 - 5.5 volts, all I can figure is that you are checking the voltage on the AC volt side before being converted to DC volts. But from the voltage at the battery while engine is running you are deffinately charging.

TOM
There is a bundle of red wires all crimped together. In that bundle is a wire to the voltage regulator, a wire to the stator, a wire to the electric choke, a wire to the taillight and a wire to the headlights. All red and crimped together. Im pretty sure this should be 12 VDC due to the fact that all the bulbs are 12 Volts and these wires go from the crimp directly to each component. The buggy runs fine and the battery stays charged but none of the lights work and the bulbs have been checked.
Reply With Quote