Thanks for the response.
My carb does have Keihin embossed on the side of it. but with the issues i'm experiencing, it makes me wonder about it's athenticity though. HOWEVER: I did just read something about that carb on another site that I need to look into. They were showing a cap installed on the same side as the idle speed screw that is to remain on. "it's not a vent".
Well, I don't recall any caps on my carb. So I'm going to see if there is a vent and try capping it. Then see if that solves my problem of fuel spiiting out and bubbles following it. (it means air HAS to be getting into the bowl area from somewhere)
Well, nonetheless, I'll run the kart with the stock CV 24 on it for now and get some #'s with it. Then I'll try a bigger carb (PE28 if it works, or probably the VM 26-606) and see where that gets me. Then I'll post those findings for everyone to see.
|