The 2 wires you show are a blue/white and a green/white. Looking at the schematic I see neither color combo listed. The blue /white I thought went to the trigger on the stator according to the schematic should be a blue/yellow, and the green/white is not shown but a green/yellow is. Be certain the stripes are indeed white and not yellow for the camera may show it different. The blue/white looks to have a blunt crimp so as not to ground out on the frame. Confirm this for if it is it would be used for an option not on your buggy, this is common. The green/white definitely went somewhere which is evident by the broken terminal. The only black wire in the schematic shows it going to the light & ignition switch and the cdi. This is a hot and not a ground. The best thing you can do is to download the schematic from the ASW website then sit down and look over the wires tracing them to find where they go. With the ignition on check that you have 12V at the cdi blk. wire.
|