[JERSEYDEVIL]

BRAKE PEDAL
had a harder time w/ this then a shouldve. cut steel and made parts for 3 different ideas and even ordered a wilwood brake pedal/master assembly.
i got the brake kit in the mail. ordered a wilwood remote resi kit and pedal. wasnt sure if it was gonna fit because the space i had and the measurements that were online were very close. it ended up just being too big.so i was back to the drawing board. i hadnt really looked at or considered the crossfire master , i kept wanting to try and adapt an HH/joyner stylemaster but i didnt like how tall it was and the placement in conjuntion w/ how close it was to the gas pedal throw. i dug out the crossfire master and used the same bracket i made for the HH master. it's alot lower profile and seemedto just fit better. or the pedal i used the HH gas pedal and turned it around. the spring end and spring fit perfect over the stock brake pedal boss and the bolt, altough a little long bolts right up. i mated it to the cantilever from the crossifire's brakes and made a bolt-on tab. this way i can unbolt the tab and get the pedal off because the thru-bolt is too long.worked perfect.