View Single Post
  #1  
Old 03-22-2011, 01:18 AM
schmidtc194 schmidtc194 is offline
Lurker
 

Join Date: Mar 2011
Location: Mohave Valley, AZ
Posts: 10
Default GY6 getting spark but won't start. Wiring?

I have a Baja Reaction 150. I just bought it from some guy (whom I'm begining to dislike) He said it ran but it needed a new automatic choke because it had broke off. After getting it home I relized it had no spark plug, no fuel pitcock, no ignition/push button. I have replaced all the above, but the wiring was all messed up and wires not connected. I have replaced everything to the best of my ability using the close but not exact wiring diagrams I have found online, all appears to be correct. I'm getting good spark and fuel. It will pop or backfire out of the carb while turning over but will not start. I also forgot to mention that I have checked the valves and they are to spec. My question is can I get good spark out of the plug and still have some wires not connected properly that would make it backfire but not start? There is a strong posiblity that I do not have the wires correct. Just want to know if this is possible. Any help on this would be appreciated.
Reply With Quote