Quote:
|
Everything I have read my buggy has both of what people have said for AC and DC. It has a kill switch, a push button, but the kill switch isn't wired to the CDI. On the secondary plug there is only 1 wire, a black one. There is a black wire with red stripe coming off the stator but it isn't connected to anything. I have included pictures of the CDI, the 4 wires to the CDI and a pic of the wires coming from the stator. Yes, it is a GY6 clone 150cc.
|
Where does the black wire go to on the secondary plug? The black with red stripe plugs into a bullet connector which goes somewhere, usually another black with red stripe wire that ends up in one side of the secondary CDI connector. Does it look like the secondary connector ever had another wire in it? A little history of the buggy might help. Did you remove the CDI 4-pin connector end or someone else? With the battery hooked up, turn the ignition switch on and see if you have 12 vdc on the black wire in secondary connector.