Got my cam slippers for the driven & 1-1/4" wide belt in today so now I can see if everything works!!! I just put the fuel line straight into a gas jug for this test.While cranking the engine to prime the carbs after re-setting the floats I found out the muffler choked the engine down (ALOT) so I pulled it off.I have a slight wobble in the driven pulley that I need to figure out.I didn't go to WOT throttle since I don't have the wheels/tires or a load on it. Here's a short vid of that test:
http://www.youtube.com/watch?v=Fh70dJrIrGU