[jmansracerocket]

ok so my spiderbox has been sitting for a while in the shed I believe over a yr now since the hammerhead came into play. Just makes me said seeing it sit there and I have tons of parts for it in the attic so I decided to get her cleaned up and running good.

The rear swing arm was a eye sore with rust and faded paint so everything coming off




All the original brake lines, master, and reservoir getting replaced all new.


New master in


The front control arms had a little play in them which I didn't like so I added washers on the front bolt side and washers on the rear nut side and shes nice and tight now.



The rear swing arm got sanded down by using a cut off wheel with a sanding disc let me tell u very time consuming. With that I welded a couple spots, cleaned up a couple wholes, and cut off 2 tabs that I wasn't using. 1 Coat of primer and 5 coats of hammered spray paint. I sprayed the hell out of it with a heavy duty degreaser right before the primer started.