long overdue update, When I last put the yerf away the rear swing arm developed a stress crack in the corner but the motor mount so I decided to beef up the rear swing arm. With that my brother helped me with the brakes so it now has brakes lol. I bought new light bulbs for the head lights, the led ones just flaked apart so out they came. I cut the connectors off the wiring that connect to the coil and put new connectors on that are nice and tight with shrink wrap. Had to change the fuel filter as it looked pretty clogged and didn't seem to be flowing like it use to. Still have some beefing up I want to do by the front where it connects to the frame. Might put a little more bracing by the rear motor mount and put a piece of rubber in between the nut and frame for the rear motor mount. Also want to get 2 locking collars for the steering shaft. Still a decent amount of work left ive really been thinking about just keeping it at this point as my goal was to sell it this year.
__________________
Hammer head Single seater know as herbie
under construction
Aluminum fuel tank, aluminum wheels, custom fuel/cargo rack, entire rewire, trail tech vapor, ported big valve head, a12camshaft, 12 gram sliders, straight intake, kirkey wide seat, front end extension. 4 point harness, welded cage. Hammerhead exhaust.
Blade Single Seater Restore
welded cage, engine build, new wiring harness/electric box, spun aluminum fuel tank.
|