The solenoid has 2 large terminals and a 2 wire pigtail. The + lead off battery goes to 1 terminal on the solenoid ans another lead goes from the solenoid to the starter. With a jumper wire jump across the 2 large terminals on the solenoid. If the starter turns over the starter is good, if not the starter is bad. If starter turns over the next step is to make sure the yellow wire off pigtail gets 12 volts when key is turned to the start position and the green wire off pigtail goes to ground. If either is missing to the pigtail the problem is either in the harness or ign switch. If you have the voltage to yellow with key turned to start and the grn wire goes to ground the problem will be the solenoid.
|