This is one of the problems with engines over the internet. Many of the sellers have no clue what they are selling, only that it is a gy6. Their are several different manufactures that wired their particular buggy depending on how they seemed fit to wire it to the acessories that were on the buggy. The Yerf was a basic wiring since except for headlights they came with no acessories. You will have to rewire the motor to adapt. We will need much more info such as how many pole is the stator what color and how many wires come off the stator. Usually the stator has one plug with anywhere from 3-5 wires and I have seen some with more and 2 seperate wires with bullit connectors. The main plug is for the charging only where the 2 single with bullit connectors are for the ignition and should match up with current wiring. Connecting just the 2 single wires will enable the engine to run, but it will not charge unless the new engine is wired fior a DC cdi vs. the yerfs stock AC cdi. Let us have more info with some good pics. Remember we cannot see what you are looking at so accurate info and pics are necessary.
TOM
|