According to the jet size in the carb, that carb was intended for a scooter. same carb but different setup. Carbs for Buggys normaly start in the low teens, I have ran into this problem before, buying carbs of ebay. The low idle jet should be changed out also. [next to the main, this one has a tube out the end with tiny holes in the side] there should be a number on the side. If memory serves me it should read 35 to 37. The scooter idle jet is also too lean. Explains the stalling issue. Getting this jet is a pain. you have to go through a kehin distributor [a motorcycle dealership] take the carb with you! the kid behind the counter won't have a clue! I can give you all the pertanant numbers for quick identification if you can hold out for a while. I won't be at my resources for a few more days. I've had enough cold weather, I went south for a while
|