Thanks, ckau. I had already tried to do that. The round metal disk that the bulb is mounted into will not pass through the smaller, square hole in the light assembly frame. The other possibility is that if the white wire could be removed from the base of the bulb frame, then the bulb/disk could be removed and replaced. Unfortunately, I cannot remove the white wire. Under a magnifying glass, it appears that the wiring that protrudes from the end of the wire is actually soldered (?) to some little metal protrusion coming out of the bottom of the bulb. I know this just can't be, but it looks like the entire headlight assembly has to be replaced as a complete unit.
|