#1 Ok slestak changed out the plug & no go #2 xman i think when i was putting the tensioner back in the block it pushed the plastic guide to the side of the chain & then after a little rotation of the cam chain it grabbed it and pulled it down beside the chain itself! once I took the topend back apart I discovered the tensioner beside the chain. I need to stress that the buggy was running great for about 2 days before this happened & then when I went to start it on the 3rd day I could tell something wasnt right & thats when I discovered the tensioner problem and corrected it, could the cam chain have slipped a little when this happened and if so what damage could it cause? I have put the piston back tdc and realigned the cam & chain, checked tolerances on valves made sure I have spark & fuel, I just dont know! I'm going to take it all apart again 2marrow & put it back together again just to make sure again!!!
