Quote:
Originally Posted by 2SlickNick
If it is you fuel enrichment valve you can do as I did. And make it a manual enrichment valve. This is from another member who showed me.
Look at post #37
http://www.buggymasters.com/forum/showthread.php?t=4518
Only thing I did different is I used epoxy to adhere the top nut on and used a ( this stuff like JB platic weld to close the hole wires use to come from)
Unscrew bolt allows fuel through thus enriching it make it easier to start on cold days.
And closing bolt'; closes valve and is how the buggy normally should run. |
Looked high and low for those bolt mod pics last night with no luck!
easy but tough mod to do, real crap shoot on how the chokes are assembled. I broke 2 chokes trying to unscrew them, success with a 3rd. It looks like some get glued together at the threads. First two were completely fused together at the thread, the broken chunks at the threads wouldn't come off of each other. 3rd one had little bits of clear glue, thought it was sand in the threads at first, but it was definitely a glue of some sort.