I cleaned out the Needle jet and spent some time on the pilot jet since that one was really gummed up and had no flow. I cleaned the carb then put some has in bowl of it to prime and filled the line but still no luck when trying to start. I decided to check for spark since I realized i hadn't done that yet and discovered that was nothing coming from the ignition coil it seems. So I will have to order a new one of those. I also have a feeling the autochoke might be bad which if it is I might just order a whole new carb since I doubt the cost is very far from each other and from what I've seen a new carb comes with a new auto choke
|