Quote:
Originally Posted by danthony
BuggyMaster, I FOUND A WIRING SCHEMATIC OF A HELIX 150 AND A TRAILMASTER 150, AND LAST NIGHT I SAT DOWN AND STARTED ALL OVER WITH THE WIRING ON THIS BUGGY...AND THE TRAILMASTER AND THE HELIX THAT I'M WORKING ON ARE BOTH DC FIRE CDI BUGGIES...IT ONLY TOOK ABOUT 1 1/2 HOURS AND I HAD IT RUNNING GOOD...THE GUY THAT I'M WORKING ON THIS CART FOR HAD IT WIRED ALL MESSED UP!!! HE DIDN'T HAVE THE TRIGGER WIRE, OFF THE STATOR, WIRED INTO ANYTHING...AND ON THIS CART THE BLACK WITH A RED STRIPE COMING OUT OF THE STATOR, DOESN'T GO TO ANYTHING...WELL, HE HAD IT AS A GROUND WIRE, AND HE TIED IT INTO 3 DIFFERENT WIRES!!!  ALSO, HE HAD THE CHOKE/FUEL ENRICHER WIRED TO BOTH A GROUND WIRE FROM THE FRAME AND A GOUND TO THE BATTERY!!!  IT IS SUSPOSED TO WIRE UP TO THE YELLOW WIRE OUT OF THE VOLTAGE REGULATOR AND THE GREEN WIRE THAT GOES TO THE 10AMP RESISTER ON THIS BUGGY...I DON'T EVEN SEE HOW THE BUGGY WOULD START AT ALL IN THE BEGINNING....BUT, SHE RUNS LIKE A CHAMP NOW, THANKS EVERYONE FOR ALL THE HELP AND SUGGESTIONS...YALL DON'T KNOW HOW MUCH I REALLY APPRECIATE IT ALL.... |
By any chance, can you help me out with a wiring picture, I bought one exactly with the same issues like yours. all the wiring is wrong.