#1
|
||||
|
||||
Howdy Hi Everybody!
Hi Gang! Jake from PA here. I'm located in Revloc PA, about 20 miles north of Johnstown and 80 miles east of Pittsburgh. I have a 2008 SunL SLGK160 with a for now stock 150cc 157QMJ GY6 on board. I have done plenty of asthetic mods to her. Pretty much made her a Pittsburgh Steeler buggy with decals, diamond plate on the floor and dash, additional rear lighting, a larger 250 gas tank, and other doo-dads here and there. I have been online researching engine mods and that's where you guys came into the picture. I browsed some of the info on here and joining up was a no brainer. I hope I can help with my experiences tinkering on mine with the members here, as well as gather some knowledge for my future upgrades. Glad to have found younz!
|
#2
|
||||
|
||||
welcome to the forum i'm new here to you should also check out the NEBA maybe we can ride some time your about 60 miles from me.
__________________
asw carbide 1500 main and clutch springs HP clutch and bell koso variator performance cdi uni redneck intake fmf exaust 9gram rollers 39 tooth sprocket 140main and 40 pilot jet |
#3
|
||||
|
||||
welcome to the group
olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#4
|
||||
|
||||
Thanx PAbuggy, Yep yep, you're lil' over an hour north on 219 from me. I'll have to check out NEBA. I have to get me a trailer before I can roam, just enjoying the local terrain at the moment.
|
#5
|
||||
|
||||
|
#6
|
||||
|
||||
welcome to the site!!!
'tis the season for gettin' dirty....
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon) |
#7
|
||||
|
||||
hi im evan and welcome to the site
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
#8
|
||||
|
||||
Thanx KID, with all the snow melt off it's indeed the season for gettin' dirty, I went out on Saturday with 2 quads for about 4 hours and we was muddy!
|
#9
|
||||
|
||||
|
#10
|
||||
|
||||
Welcome aboard you got some great members in your area in the NEBA definitely worth joining.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
#11
|
||||
|
||||
Thanx EJ Mac, definitely gonna check into the NEBA.
|
#12
|
||||
|
||||
Glad to have you! Go Browns!
|
#13
|
||||
|
||||
OOOOOOOHHH BOY!!
that should open up a can.....i see there are a few members on here from PA. i'm an ohio boy and support our teams but i must say i support two PRO football programs. the browns and the team playing the sqeelers. (nope, not a type-o). i like nothing more than to see big ben land on his keester during a game.. as far as college....i bleed scarlet & grey....GOOOOO BUCKS!!
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon) |
#14
|
||||
|
||||
colts, saints, and spartans!!! lol no not because colts and the saints were in the super bowl my top 3
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150 |
#15
|
||||
|
||||
Thanx BuggyMaster!
LOL We got ourselves a sports thread running! I'm contractualy obligated by the unwritten laws of regional sports and local and state boundaries to support: Steelers, Pitt, Penn State, Penguins, and sometimes Eagles, but not so much the Flyers and 76ers! LOL By the by, I have noticed that PA is well represented on here! |
#16
|
||||
|
||||
Welcome to the site.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! |
#17
|
||||
|
||||
|
#18
|
|||
|
|||
hi jake chuck here from washington i too am die hard steelers fan have same buggy its sat for 8 months now on the rebuild process having trouble but am hopefull not at all mechnic but with help from guys like yourself am thinking i can get it done
|
#19
|
||||
|
||||
Hi chuck, the steeler nation is strong! Let's hope you don't encounter many problems on your rebuild, and if ya do hit a snag, we're here for ya!
|
Thread Tools | |
|
|