|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
Redneck MK. II Project
Okay, I made a redneck intake from PVC pipe and installed it on my 30mm pumper. I wasn't really happy with PVC as a material as the pipe wall thickness eats away at space better used for airflow. Secondly, the size of the flexible couplings was bigger than I really needed (just need airtight not pressure sealed to 3 zillion psi of water pressure). So, I realize I'm probably late to the game as far as sourcing materials, but I found a company that will custom cut metals and plastics (pipe, tube, sheet) for what I consider reasonable prices and ordered some aluminum tubes to try out.
Tube A: 2" OD x 0.035" wall x 1.93" ID 6061-T6 aluminum 6" cut Tube B: 1.875" OD x 0.058" wall x 1.759 ID 6061-T6 aluminum 6" cut Price: about $30 with shipping. I'll throw the link up if anyone is interested and they have an affiliate plan if Buggymaster has any interest in that.
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
#2
|
|||
|
|||
Oh, and i got the tubes in two days.
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
#3
|
||||
|
||||
I was going to suggest using thin aluminum or steel tubing off ebay, and a couple silicone couplers. Thats the way I'm heading with mine. Trying to decide whether to add the crankcase vent to the intake tube or vent it through a separate filter.
__________________
ASE Master and Toyota Master Diagnostic Certified Buggy Building Trainee '04 Dazon Raider 150 'modded' |
#4
|
|||
|
|||
Oh! silicon couplers! I didn't even think of those.. I got the tubes from onlinemetals.com. I reduced the pilot jet to a #35 and the main to a #138 and she's running nice. Although I have a 59mm BBK and 4 valve head on the way, so a re-jet is in the future..
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
#5
|
|||
|
|||
Finished...Until the new jug and racing 4 valve head get here..and while i have the case apart, might as well throw in a Dr. Pulley full CVT upgrade.. I CAN STOP ANYTIME I WANT, I SWEAR!!!!! Oh, and Sycarms has me pondering these naughty suspension upgrades...
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B Last edited by wildbob; 11-17-2013 at 06:47 PM. |
#6
|
||||
|
||||
Looks nice. I like the outer wear. Have been debating about getting one.
It would save me bringing an exta filter on riding trips.
__________________
Growing old is mandatory Growing up is optional https://www.youtube.com/watch?v=NEXoa-8d7qE |
#7
|
|||
|
|||
Thanks to Mastertoyota for the heads up on silicone couplers for the intake..much better. Mishimoto silicone couplers if anyones interested..
__________________
2013 Trailmaster XRX 150 Type 86 stroker Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit 2014 Kandi 90B |
|
|