BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech
Reload this Page Which gy6 do I have
Register FAQ Calendar Arcade Mark Forums Read

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 11-20-2015, 07:21 PM
Tombo Tombo is offline
Lurker
  

Join Date: Apr 2015
Posts: 19
Default Which gy6 do I have
OK, so I have an ASW helix with the 150cc gy6 motor on it and the motor bit the dust. Some of you saw my introduction post where I said there was no airbox, but a "fuel saver fan" like people out on their cars. Well, that stupid thing doesn't/didn't stop mud from getting into the motor and now it burns almost as much oil as it does gas as well as having 0 power. I want to replace the motor, but I'm finding long case and short case motors with warnings to make sure you get the right one. I don't know which one I have. Any help? Like what do I measure to see which one I have? Or just which one is it?
Reply With Quote
  #2  
Old 11-20-2015, 09:30 PM
wildbob wildbob is offline
Heavy Contributor
  

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default
hey,
post some pics of that bad boy and any engine codes that you can find on it.
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
Reply With Quote
  #3  
Old 11-21-2015, 10:40 PM
Tombo Tombo is offline
Lurker
  

Join Date: Apr 2015
Posts: 19
Default
Pictures of the motor or buggy? I don't have any of the buggy on hand. It's at my dad's house 30 miles away. Here's one of the buggy though
Reply With Quote
  #4  
Old 11-21-2015, 11:40 PM
BEEFKING69's Avatar
BEEFKING69 BEEFKING69 is offline
Contributor
  

Join Date: Jun 2015
Location: Blountstown, Fl
Posts: 364
Default
All buggys have short case gy6
Reply With Quote
  #5  
Old 11-23-2015, 10:51 AM
wildbob wildbob is offline
Heavy Contributor
  

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default
You need to post pics of the motor..
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
Reply With Quote
  #6  
Old 11-24-2015, 10:17 PM
Tombo Tombo is offline
Lurker
  

Join Date: Apr 2015
Posts: 19
Default
Quote:
Originally Posted by wildbob View Post
You need to post pics of the motor..
I'll be down at my dad's for Thanksgiving so I'll snap a few then. I'm gonna tear the motor apart the first chance I get and see what got destroyed. I'm pretty sure it's just the cylinder and piston rings, but I'm gonna make sure before I order anything. I'm going to rebuild the original motor for 1/4 the cost of a new one.
Reply With Quote
  #7  
Old 01-25-2016, 10:46 AM
mtbdudex's Avatar
mtbdudex mtbdudex is offline
Contributor
  

Join Date: Nov 2015
Location: SE Michigan
Posts: 136
Default
How did the rebuild go?

I'm curious your experiences/etc.
__________________
Mike R, P.E.
2015 150cc TAOTAO Targa 150
Reply With Quote
  #8  
Old 03-20-2016, 11:35 AM
Tombo Tombo is offline
Lurker
  

Join Date: Apr 2015
Posts: 19
Default
Haven't been on I a while. Sorry it has taken so long for an update. So, Thanksgiving I went down to my dad's as planned. That's where the plan ended and the proverbial s***storm began. 1st my brother decided to start a fight with dad. Got that diffused, but then dad started in on me about my buggy being in the way. This eventually led to him grabbing it with the claw bucket on his skid steer and destroying the roll cage... So, about the buggy, as stated the roll cage is junk. It was removed and I planned on running it without one after the motor rebuild. Never got around to that and one of my dad's buddies offered me $500 for it the way it sat so it's gone. Now I'm looking for another one. Have been for a while, but now I'm starting to get serious about this.
Reply With Quote
  #9  
Old 03-20-2016, 12:43 PM
wildbob wildbob is offline
Heavy Contributor
  

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default
that escalated quickly..
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
Reply With Quote
  #10  
Old 03-20-2016, 05:01 PM
OLDKID's Avatar
OLDKID OLDKID is offline
Contributor
  

Join Date: Nov 2014
Location: Western N.Y.
Posts: 457
Cool
I got's an Idea ! How bout taking Dad's Skid Steer , remove claw bucket , and any other unnecessary weight , add a set of tracks and use that for some trail bashing , serve him right , the Buggy - Abuser ! " Eye for an Eye " , " Tooth for a Tooth " , " Do unto others as you'd have them do unto you " Just DON'T GET CAUGHT !
__________________
2011 BMS KING COBRA 150 Sold
YERF DOG SPIDERBOX's Sold
YERF DOG 3203's. Sold
MANCO SILVER FOX. Sold
2009 POLARIS 500 HO SPORTSMAN 4X4
2002 POLARIS 500 HO SPORTSMAN 4X4
2000 POLARIS MAGNUM 2X4
HALF A DOZEN CHEVY 4X4's
NEED-MO-BUGGY
Reply With Quote
  #11  
Old 03-20-2016, 08:33 PM
Tombo Tombo is offline
Lurker
  

Join Date: Apr 2015
Posts: 19
Default
I have enough fun using the SS digging up the trails AKA the woods at his house. Also, can't put tracks on it as the drive motors are between the wheels on either side.
Reply With Quote
  #12  
Old 03-27-2016, 04:58 PM
Tombo Tombo is offline
Lurker
  

Join Date: Apr 2015
Posts: 19
Default

The new one I just picked up last Wednesday.
Reply With Quote
  #13  
Old 04-01-2016, 07:13 PM
Gy6buggy88's Avatar
Gy6buggy88 Gy6buggy88 is offline
Lite Contributor
  

Join Date: Mar 2016
Posts: 62
Default
Nice buggy!
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -5. The time now is 08:26 PM.

Contact Us - BuggyMasters An on line mini buggy forum and go kart forum - Archive - Top

Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.