BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 11-28-2013, 09:13 AM
Dirtroad Dirtroad is offline
Contributor
 

Join Date: Sep 2013
Location: Lowell, Mi
Posts: 110
Default HOW TO- remove emissions

I figured i would do a quick how to. I removed the emissions junk and drilled the exhaust out and took pics along the way. Figured i could show i did these mods.

First, removing emissions.

I dont own a welder yet so i figured why not try it being more creative.

First i found a self tapping bolt that was just slightly bigger than the ID of the tube. I just happened to have one.

Then i removed the emissions thingy and cut the tube the same length as the bolt i had.

Lifting your buggy first helps getting the exhuast off hehehehe













Then i screwed the bolt in and then backed it out. It effectively made threads inside the tube. I then slathered the bolt in locktite and put it back in.



And thats it, works great.
__________________
2009 ASW Carbide Uni filter, outerwears, redneck intake, 130 main jet, 38 pilot jet, drilled exhaust, DR Pulley 9g sliders, 2000rpm clutch spring, adjustable CDI and 39T sprocket

2009 ASW Carbide 39T sprocket, DR Pulley 10g sliders, drilled exhaust

2010 ASW Vector bone stock

Last edited by Dirtroad; 11-28-2013 at 09:35 PM.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:22 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.