BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 07-06-2014, 11:36 AM
kittletstv kittletstv is offline
Lite Contributor
 

Join Date: Aug 2013
Location: Phx, AZ
Posts: 75
Default Spacer placement for Ext. Rev.

Since I had originally taken the gearbox apart some time ago I have now forgotten exactly how the 2 large spacers go. One of then is a large narrow band, and the other has a similar OD with a stepdown colared ID and fits tighter on the shaft. It seems like they were stacked together between the sprocket side of the gearbox & the output shaft bearing in the main case but they don't really seem to go together like I would have thought. Anybody know exactly how they stack back together (I am assuming they do anyway)? Then there is also a different small ring spacer out on the outer end behind the nylock nut @ the end of the shaft. Thanks for the help once again.
Reply With Quote
  #2  
Old 07-31-2014, 10:41 AM
WICKED BUGGY WICKED BUGGY is offline
Lurker
 

Join Date: Jul 2014
Posts: 1
Default

I have a similar issue with a silver external reverse gear box. Any guidance from someone with some experience. Mine is disconnected now so the kids can ride but it was like it was in forward and reverse at the same time. Thanks
Reply With Quote
  #3  
Old 12-18-2014, 11:29 PM
buggymike1976 buggymike1976 is offline
Contributor
 

Join Date: Dec 2012
Location: middleburg Florida
Posts: 121
Default

Do u all still have probs with gear box if so give me pic and I can help u all
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:28 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.