|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
 |
|
|
Thread Tools |
|
#1
08-12-2010, 06:39 AM
|
|||
|
|||
Buggy won't stay running
My 150cc GY6 buggy starts, then when i push on the gas, it stalls. If I try to start it with my foot on the gas it will not start, unless I release the gas pedal. Can someone please point me in the right direction to getting this fixed?
|
|
#2
08-12-2010, 07:37 AM
|
|||
|
|||
|
Could be a clogged pilot jet or intake leak. Is this after it warms up or as soon as you start it?
|
|
#4
08-12-2010, 01:06 PM
|
||||
|
||||
|
elec choke
carb needing cleaning air leak around the intake
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far
|
|
#6
08-17-2010, 07:03 AM
|
|||
|
|||
|
I pulled the carb off of the buggy and took it apart and cleaned it out, and I am back up and running. However, I noticed the air filter is a foam type filter and I live on a gravel road that gets pretty dusty this time of year. Is there a better filter I could get to help protect my carb better?
I really appreciate everone helping me get my buggy up and running again, Thank you very much!!!!!!
|
|
#7
08-17-2010, 08:44 AM
|
||||
|
||||
|
Get rid of your stock air box and use either a Uni Filter (oiled foam ) or a K&N filter(oiled cotton pleted). However since this will give you more air volume you will need to reje the carb. You will get better performance and have a much better filter system. I keep both type in stock. TOM
|
|
|
|
