BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 03-17-2015, 01:36 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default newbie here. serious help needed......

Hi all, love this site!! I recently acquired a carter brothers 150cc talon. Thing looks like someone started to do a top end rebuild and quit. It's a nightmare. I'm sure it's missing parts. I've rebuilt several dirt bikes in my day, but never a motor like this. The top end rebuild doesn't worry me. What does worry me is the missing parts. Here's what I KNOW it needs....

Starter.
Exhaust pipe.
Rocker arms.
Valve cover.
Battery.

I've done a little reading about them and seen several posts regarding the drive belt.....this one has a chain and sprocket. I don't see anything a clutch type drive belt would go on. Anyone willing to swap phone numbers so I can text pics? All I'm really.looking for right now is someone to look at what I have and tell me what's missing. Thanks in advance for any help regarding this!
Attached Images
File Type: jpg 20150314_230055.jpg (100.7 KB, 25 views)
File Type: jpg 20150314_225947.jpg (93.1 KB, 23 views)
File Type: jpg 20150315_171018.jpg (99.9 KB, 19 views)
Reply With Quote
  #2  
Old 03-17-2015, 01:58 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

welcome eagle, the belt and clutch referred to here would be inside the covers on the left side of the engine.
Reply With Quote
  #3  
Old 03-17-2015, 02:00 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

might be cheaper to buy a new engine. why is the fuel line loose?
Reply With Quote
  #4  
Old 03-17-2015, 02:02 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

does this motor have a name brand on it?
Reply With Quote
  #5  
Old 03-17-2015, 02:04 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

All I can find on the motor is what looks like the Vin and gy6. The fuel line is off because the carb is off.
Reply With Quote
  #6  
Old 03-17-2015, 03:25 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

do you have any of the parts that are missing?
Reply With Quote
  #7  
Old 03-17-2015, 03:26 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

what is the # you found on the motor?
Reply With Quote
  #8  
Old 03-17-2015, 03:38 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

I have the jug, cam, and carb. The biggest problem I have right now is I don't know what else is missing. Everything that's electric is gone. Luckily it's just us plugged. I did see that I could get a new motor for about 300$. Personally I'd rather get to know this little motor and just get what i need. The pics I posted aren't the best. I have removed the motor, it's sitting in my living room.
Reply With Quote
  #9  
Old 03-17-2015, 03:39 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

I'll have to get back with you on the number. It's written down at home. I do remember 157fmj.......or 157fmq maybe...
Reply With Quote
  #10  
Old 03-17-2015, 04:01 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

how m any valve cover bolts does it have?
Reply With Quote
  #11  
Old 03-17-2015, 04:04 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

It has 4 bolts.
Reply With Quote
  #12  
Old 03-17-2015, 04:06 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

I don't have a cover plate for it tho.....
Reply With Quote
  #13  
Old 03-17-2015, 04:23 PM
jmansracerocket's Avatar
jmansracerocket jmansracerocket is offline
Senior Member
 

Join Date: Apr 2012
Location: ny, long island
Posts: 1,342
Default

i see another problem, if you don't have a welder theres a chunk of the rear swing arm missing in the rear swing arm of the frame.
__________________
Hammer head Single seater know as herbie
under construction

Aluminum fuel tank, aluminum wheels, custom fuel/cargo rack, entire rewire, trail tech vapor, ported big valve head, a12camshaft, 12 gram sliders, straight intake, kirkey wide seat, front end extension. 4 point harness, welded cage. Hammerhead exhaust.



Blade Single Seater Restore
welded cage, engine build, new wiring harness/electric box, spun aluminum fuel tank.
Reply With Quote
  #14  
Old 03-17-2015, 04:24 PM
jmansracerocket's Avatar
jmansracerocket jmansracerocket is offline
Senior Member
 

Join Date: Apr 2012
Location: ny, long island
Posts: 1,342
Default

I would pull the motor out of the buggy a lot easier to work on especially if you want to go threw the motor and check/ replace some stuff.
__________________
Hammer head Single seater know as herbie
under construction

Aluminum fuel tank, aluminum wheels, custom fuel/cargo rack, entire rewire, trail tech vapor, ported big valve head, a12camshaft, 12 gram sliders, straight intake, kirkey wide seat, front end extension. 4 point harness, welded cage. Hammerhead exhaust.



Blade Single Seater Restore
welded cage, engine build, new wiring harness/electric box, spun aluminum fuel tank.
Reply With Quote
  #15  
Old 03-17-2015, 04:30 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

I noticed that to jman. Mind boggling on why anyone would do that. I do have a welder and set of torches lol. Does anyone have a link to maybe an exploded diagram of a complete motor? Or anyone willing to text me pics of theirs?
Reply With Quote
  #16  
Old 03-17-2015, 05:39 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default

those numbers you found on the motor are model numbers.
Reply With Quote
  #17  
Old 03-17-2015, 05:52 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

I'll post them when I get home.
Reply With Quote
  #18  
Old 03-17-2015, 06:06 PM
jmansracerocket's Avatar
jmansracerocket jmansracerocket is offline
Senior Member
 

Join Date: Apr 2012
Location: ny, long island
Posts: 1,342
Default

I forgot to ask did u do a compression test on it ? Or even try to start it ?
__________________
Hammer head Single seater know as herbie
under construction

Aluminum fuel tank, aluminum wheels, custom fuel/cargo rack, entire rewire, trail tech vapor, ported big valve head, a12camshaft, 12 gram sliders, straight intake, kirkey wide seat, front end extension. 4 point harness, welded cage. Hammerhead exhaust.



Blade Single Seater Restore
welded cage, engine build, new wiring harness/electric box, spun aluminum fuel tank.
Reply With Quote
  #19  
Old 03-17-2015, 06:10 PM
jmansracerocket's Avatar
jmansracerocket jmansracerocket is offline
Senior Member
 

Join Date: Apr 2012
Location: ny, long island
Posts: 1,342
Default

Don't let the top end rebuild get the best of you. Watch some videos on YouTube to get ur self threw it these engine are actually easy to work on.
__________________
Hammer head Single seater know as herbie
under construction

Aluminum fuel tank, aluminum wheels, custom fuel/cargo rack, entire rewire, trail tech vapor, ported big valve head, a12camshaft, 12 gram sliders, straight intake, kirkey wide seat, front end extension. 4 point harness, welded cage. Hammerhead exhaust.



Blade Single Seater Restore
welded cage, engine build, new wiring harness/electric box, spun aluminum fuel tank.
Reply With Quote
  #20  
Old 03-17-2015, 06:21 PM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

It's not the top end I'm worried about. I've rebuilt several dirt bikes. When I took possession of the kart, the jug was already out.
Reply With Quote
  #21  
Old 03-18-2015, 05:38 AM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

Here is pics of the numbers on the case. Also a pic of the motor.
Attached Images
File Type: jpg 20150318_053123.jpg (97.3 KB, 14 views)
File Type: jpg 20150318_053218.jpg (95.8 KB, 16 views)
Reply With Quote
  #22  
Old 03-18-2015, 07:10 AM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

missing chunk of frame looks like PO was doing a uni-filter/carb clearance mod and never finished. Look up user "JerseyDevil" and check some of his threads in his "statistics" in his profile. he's done the mod on a couple of his swingarms.

The carter manuals are pretty good, service manual has a full engine rebuild step-by-step here's the link to the pdfs.
http://www.carterbrothersparts.com/c...others_manuals

I may have a spare side plastic for around the fan, with these 150s, you do need to have all the plastic shrouds on them for cooling air flow.
Reply With Quote
  #23  
Old 03-18-2015, 07:16 AM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

As far as the motor goes, besides the carb and jug, that's all I have. No plastics. No cdi box, no starter. What's the little arm on the Clutch? Have no idea about that. Thanks for the link. Yall have already been helpful. I guess I'm gonna start buying what I know it needs. How can I tell if it's ac unit or dc? I seen on line how to compare the 2 cdi boxes, but I don't have one to compare to.
Reply With Quote
  #24  
Old 03-18-2015, 07:53 AM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

The pic I posted with the serial/model number.....how do I decode it? Will it team me what model? Gsx? Gtr? Ect.....
Reply With Quote
  #25  
Old 03-18-2015, 08:24 AM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

Ok, did a little more reading and now I'm even more confused. The engine case numbers.....most common type of gy6 is 157qmj. There is little info on case numbers with 157fm. From what I've read the case sizes are different. Also seems that the fm models used a 125 case. Still a 57mm bore. Just a smaller case. So my question is, will qm parts work on a fm engine? I figure they should as long as I don't bore it. I have read about the big bore kits. Seems a lot of people have had trouble after installing a big bore kit.
Reply With Quote
  #26  
Old 03-18-2015, 09:20 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

You have the early Carter GY6 Motor. These were the best GY6 put in the buggies. There are a ton of mods for this engine. Stock they will top out around 32mph unless it is an 05 or some 06 used a taller ratio in the final drive which will top 40mph but won't do well on hills. You can give me a call 662-301-1563
Reply With Quote
  #27  
Old 03-18-2015, 09:32 AM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

THANK YOU Sycarms
Reply With Quote
  #28  
Old 03-18-2015, 12:10 PM
zman007007's Avatar
zman007007 zman007007 is offline
Senior Member
 

Join Date: Dec 2012
Location: Gray Court,S.C.
Posts: 1,476
Default Numbers

Quote:
Originally Posted by wareagle15 View Post
Here is pics of the numbers on the case. Also a pic of the motor.
THE TOP NUMBER IS MODEL # BOTTOM IS S/N
Reply With Quote
  #29  
Old 03-19-2015, 07:34 AM
Numbers's Avatar
Numbers Numbers is offline
Lite Contributor
 

Join Date: Dec 2014
Location: Bourbon Trail
Posts: 85
Default

Looks like it's missing the reverse gear support bracket.
Reply With Quote
  #30  
Old 03-19-2015, 08:00 AM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

Thanks Numbers. Would you happen to have a pic of that support? I spoke with Tom from sycpowersports.com yesterday for about 30 mins. Awesome guy!! Gave me lots of helpful info. Definitely lifted my spirits with the kart. Thanks to all of you for your input!!
Reply With Quote
  #31  
Old 03-19-2015, 09:27 AM
Numbers's Avatar
Numbers Numbers is offline
Lite Contributor
 

Join Date: Dec 2014
Location: Bourbon Trail
Posts: 85
Default

Quote:
Originally Posted by wareagle15 View Post
Thanks Numbers. Would you happen to have a pic of that support? I spoke with Tom from sycpowersports.com yesterday for about 30 mins. Awesome guy!! Gave me lots of helpful info. Definitely lifted my spirits with the kart. Thanks to all of you for your input!!
Yes. I do but it's at home. Will post later or post a link to what mine used to look like. The one I have now is a single support. The previous one was two pieces.

Tom must be getting tired of us Carter people calling him. Lol
Reply With Quote
  #32  
Old 03-19-2015, 09:29 AM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

Thanks. Naaa, he was very helpful and seemed to enjoy talkin karts.
Reply With Quote
  #33  
Old 03-19-2015, 09:36 AM
Numbers's Avatar
Numbers Numbers is offline
Lite Contributor
 

Join Date: Dec 2014
Location: Bourbon Trail
Posts: 85
Default

[IMG]http://www.**********.com/attachments/images/product_image_193_928.jpg[/IMG]

The above is what my old one looked like. My new one is just one bracket but I have no problems with the setup.
Reply With Quote
  #34  
Old 03-19-2015, 09:38 AM
Numbers's Avatar
Numbers Numbers is offline
Lite Contributor
 

Join Date: Dec 2014
Location: Bourbon Trail
Posts: 85
Default

Try again...
http://www.**********.com/attachment...ge_193_928.jpg
Reply With Quote
  #35  
Old 03-19-2015, 09:38 AM
wareagle15 wareagle15 is offline
Lurker
 

Join Date: Mar 2015
Posts: 17
Default

Didn't come thru......all stars
Reply With Quote
  #36  
Old 03-19-2015, 09:39 AM
Numbers's Avatar
Numbers Numbers is offline
Lite Contributor
 

Join Date: Dec 2014
Location: Bourbon Trail
Posts: 85
Default

Insert b u g g y d e p o t with no spaces...
Reply With Quote
  #37  
Old 03-19-2015, 09:44 AM
Numbers's Avatar
Numbers Numbers is offline
Lite Contributor
 

Join Date: Dec 2014
Location: Bourbon Trail
Posts: 85
Default

https://www.google.com/search?sa=X&t...iw=360&bih=615
Reply With Quote
  #38  
Old 03-19-2015, 09:55 AM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

Quote:
Originally Posted by Numbers View Post
Yes. I do but it's at home. Will post later or post a link to what mine used to look like. The one I have now is a single support. The previous one was two pieces.

Tom must be getting tired of us Carter people calling him. Lol
Some say that I'll go to my grave still talking.
Reply With Quote
  #39  
Old 03-19-2015, 01:07 PM
tkeagle tkeagle is offline
Heavy Contributor
 

Join Date: Mar 2015
Location: Central Kansas
Posts: 556
Default

Don’t get discouraged. As someone already said the power of youtube is one of the best tools out there. When I first started working on my gy6, had not clue, or even seen one before. If you never have messed with a CVT transmission, youtube is a must. Diagrams really doesn’t give you the true scope. Not difficult. Just different. And there is easy ways to replace stuff, and the hard ways. They are really easy to work on. There is videos for Big bore kits, heads changing out the crank, carbs, reverse box. Which you have. Pretty much everything. Soak it up.  Pic of the day I brought my buggy home. And what engine looked like. Might give you idea what you could be missing.
Attached Images
File Type: jpg 3.jpg (101.9 KB, 10 views)
File Type: jpg 5.jpg (96.4 KB, 12 views)
Reply With Quote
  #40  
Old 03-19-2015, 04:23 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

Two-piece reverse gear support bracket ...
Attached Images
File Type: jpg cvri.jpg (43.0 KB, 18 views)
Reply With Quote
  #41  
Old 03-20-2015, 08:41 AM
tkeagle tkeagle is offline
Heavy Contributor
 

Join Date: Mar 2015
Location: Central Kansas
Posts: 556
Default

that's a sick setup x-bird. what setup do have that on?
Reply With Quote
  #42  
Old 03-20-2015, 03:26 PM
x-bird's Avatar
x-bird x-bird is offline
Power User
 

Join Date: Oct 2011
Location: Penciltucky
Posts: 2,518
Default

The SUnl I'm selling. I had it on my 3203 project (the Rockhound) but I physically can't take the abuse a live axle swingarm dishes out in the really rough stuff i race on.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:52 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.