BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 05-06-2014, 10:42 AM
mb1134 mb1134 is offline
Contributor
 

Join Date: Nov 2012
Location: Ringgold, GA
Posts: 383
Default Intake spacer

Just curious to know if anyone is using their stock black intake spacer with the 30mm intake manifold. I am not using mine as the bolts that came with it don't seem like it would be possible, unless you switch to a longer bolt. I have noticed that my carb sits on the rear crossbar causing the coupler on the intake manifold to not be straight and cylindrical. Basically pushing the carb up. If I were to put the black spacer in between the head and 30mm intake manifold this would fix that issue.
__________________
Trailmaster XRX 150
TK Variator and 1500 Spring
SYC Performance Ported & Polished & Shaved 2 Valve Head, A-10 Camshaft, R2C Filter, and Hammerhead Exhaust

Hammerhead 250GTS
White Torque and Clutch Springs, 18g Rollers, R2C Filter, Ported Polished and Shaved Head, Hammerhead Exhaust
Reply With Quote
  #2  
Old 05-06-2014, 11:07 AM
wildbob wildbob is offline
Heavy Contributor
 

Join Date: Aug 2013
Location: Newburyport, MA
Posts: 571
Default

I'm not using one. The I.D. of the spacer on mine was 24 or 26mm and I kept breaking them trying to bore them out to 30mm with a step bit.
__________________
2013 Trailmaster XRX 150 Type 86 stroker
Taida 4V head with 23/22mm valves, forged 4V piston,Taida 62mm jug,forged Taida 8200 KDU stroker crank, Koso high-flow oil pump, Taida case half w/ oil cooler ports, Setrab oil cooler,TrailTec Vapor, Mikuni VM26-606, aluminum 30mm intake, Uni filter, aluminum stack, Hammerhead racing exhaust, MotoRio adjustable CDI/HO Coil, Iridium plug, Full Dr Pulley CVT kit w/ 16g sliders, JD's Mikuni slide kit

2014 Kandi 90B
Reply With Quote
  #3  
Old 05-06-2014, 06:53 PM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

I had the same issue with my carb position. It made it impossible to secure the stock breather box tube to the carb itself. I actually had to end up using a set of soft grip handle bar slip ons to make the junction work! took a little contortion but worked!
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:36 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.