|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
|
Thread Tools |
|
#1
08-12-2012, 12:41 PM
|
||||
|
||||
gy6 tdc help??
ok doing a head and cam swap on the yerf and as im trying to find tdc the camshaft marks i seem to got lined up but the flywheel marks look to be way off! any help tips or hints?
   
|
|
#2
08-12-2012, 04:41 PM
|
|||
|
|||
|
This why I tell people not to pay attention to the fly wheel. Stick a straw in it, raise it to the peak on the comp stroke, valves open and call it a day.
Welcome to china tolerances |
|
#3
08-12-2012, 06:04 PM
|
||||
|
||||
|
lmao yeah i just went by the cam marks and marked tdc on the cam and put everything back together, but i think i might have recieved the wrong head!, this thing has 6 bolt holes for the valve cover. With that the hammerhead exhaust wont even fit on the head because now its hitting the clutch assembly case, and i need to get different bolts for the elbow that the carb connects to. spent all day on the dam thing.
|
|
|
