|
|
|
|||||||
| Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc) |
 |
|
|
Thread Tools |
|
#1
02-11-2011, 03:56 PM
|
|||
|
|||
New Battery
My kart did not have a battery when I bought it so I am looking for one. The engine manual recommends using a 12V-24AH or larger. The kart manual/parts list does not show the battery specifications so I am not sure what Manco recommends. The mounting location is quite small. I have checked Wal-Mart, Sam’s Club, and National Tire & Battery and no one has a 24AH battery in the size I need.
I know a little bit about batteries but not sure why the engine manual wants a 24AH battery. Most batteries that would fit on my kart only have a 3-6 AH rating. The motor has electric start and I am going to add a pair of 35 watt headlights (same wattage that came with the kart, according to the parts list). Can someone explain why my engine wants a 24AH battery? Manco Phantom Fox 720L model with 10HP Robin engine. Thanks 
|
|
#2
02-11-2011, 06:57 PM
|
||||
|
||||
|
sounds like an error in your manual 6 0r 7 ah is what is normal look and see if you can
modify the brkt & go with a 12 or 14 ah welcome to the group
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far
|
|
#3
02-13-2011, 09:07 AM
|
||||
|
||||
|
i agree, there's a misprint there somewhere. i run a 16a/hr and mine came with a 12a/hr. it's a 250cc.
regarding your lights, the bigger battery will last longer with running higher wattage lights but it's the stator that will be giving the juice. you may want to find out how many poles are on your stator so you don't draw too much with big lights.
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon)
|
|
#4
02-14-2011, 09:47 AM
|
|||
|
|||
|
Thanks for the replies. I agree, there must be a misprint about the battery rating. I found a couple of options at Wal-Mart that will fit the space, so I will get the highest rated one I can.
As far as the number of poles on my stator, I am not sure about that yet. I will check on it when I tear the engine apart for cleaning. I would think sticking with the stock 35 watt lights would be fine. We don't ride at night so the lights would be more for just in case.
|
|
#5
02-14-2011, 10:08 AM
|
||||
|
||||
|
you will be fine with those stock lights.
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon)
|
|
#6
02-16-2011, 02:06 AM
|
|||
|
|||
|
part site
i have the same buggy as you Bryce the Manco Dingo Deuce and im trying to fined a site for the belt drive and the gears for the trans. i have a 9 hp honda tested at 13 hp pinned olny need 2 more parts and its finished .
Last edited by swanker; 02-16-2011 at 02:10 AM.
|
|
#7
02-16-2011, 08:55 AM
|
|||
|
|||
|
Quote:
http://www.amsportworks.com/ipls.php?cat=gokarts Use that list to find the parts you need then order them from here. http://www.gokartsrus.com That is what I did to get my last two Manco’s running. The Dingo Deuce I had also needed a new gear in the transaxle to get the reverse to work again. The gear was worn down from people trying to throw it into reverse while the kart was still moving.
|
|
#8
02-20-2011, 10:27 PM
|
||||
|
||||
|
use a walmart batter on mine
__________________
2006 HH150.....kinda prodigy vari/clutch 11g Rollers/Yellow Main White Brothers Performance Pipe/No Rev CDI/Hot Coil Stroker Crank/BB 180 kit Mikuni VM28 - 35 Pilot - 140 Main A12 cam blaster shocks x4 vapor speedo
|
|
|
|
