|
|
|
|||||||
| Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc) |
 |
|
|
Thread Tools |
|
#1
04-17-2012, 11:31 AM
|
||||
|
||||
Headlights?
I want to put some brighter lights on my ASW Carbide. It came with 35w, I currently have 55w, and I want something that is a little brighter. I have a bigger battery than it came with. I found some 100w bulbs that will fit. Do you all think the electrical system could handle that?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! 
|
|
#2
04-17-2012, 12:52 PM
|
|||
|
|||
|
yes i know it can just wears out the wires faster
|
|
#3
04-17-2012, 01:41 PM
|
||||
|
||||
|
That's not good.. I have a few questions...
1) What wires wear? 2) Would 75w bulbs be better? 3) I've seen a few that are listed like 75=100. Does that mean they only use 75w but have the brightness of 100w? Here are some of the lights I found http://www.amazon.com/Super-White-Li...4688333&sr=8-3 http://www.amazon.com/Optilux-H71070...4688333&sr=8-2 http://www.amazon.com/Formance-93396...4688333&sr=8-4
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! Last edited by joshstep1; 04-17-2012 at 01:50 PM.
|
|
#4
04-17-2012, 01:44 PM
|
||||
|
||||
|
Would 75w bulbs be better?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#5
04-17-2012, 01:46 PM
|
||||
|
||||
|
I've seen a few that are listed like 75=100. Does that mean they only use 75w but have the brightness of 100w?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#6
04-17-2012, 01:55 PM
|
||||
|
||||
|
Sorry for the redundant messages. I can't figure out how to delete the extra two
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
|
|
