BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 08-05-2014, 05:08 PM
CFalls CFalls is offline
Lurker
 

Join Date: Jul 2014
Posts: 3
Default Carter Talon 150 getting oil on drive belt ??

Had to put new drive belt on and now after 10 minutes of riding it stopped pulling. Took cover plate off and oil is all over drive belt. I know its engine oil but how is getting on the drive belt ? Thanks for any help.
Reply With Quote
  #2  
Old 08-05-2014, 06:02 PM
351mustanger 351mustanger is offline
Contributor
 

Join Date: Jul 2013
Location: Cincinnati, Ohio
Posts: 160
Default

Transmission seal behind the clutch or engine seal behind the variator.
Reply With Quote
  #3  
Old 08-05-2014, 06:27 PM
CFalls CFalls is offline
Lurker
 

Join Date: Jul 2014
Posts: 3
Default

Never had the variator or clutch off. Is this hard ? Are the seals hard to change ?
Reply With Quote
  #4  
Old 08-05-2014, 08:57 PM
351mustanger 351mustanger is offline
Contributor
 

Join Date: Jul 2013
Location: Cincinnati, Ohio
Posts: 160
Default

If you can run a small screw into the seal, you can pull it out pretty easy. The key is being careful not to damage the sealing surface of the shaft coming through the seal or the bearing behind the seal. Then install the seal, taking care not to damage the seal lips in the center. The seal should be installed flush with the surface. You need to try to press it in evenly.
Reply With Quote
  #5  
Old 08-08-2014, 11:09 PM
CFalls CFalls is offline
Lurker
 

Join Date: Jul 2014
Posts: 3
Default

thx 351. Sorry it took so long to reply.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:37 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.