Warning: Illegal string offset 'type' in [path]/includes/class_postbit.php(294) : eval()'d code on line 57
Kandi 150FS rear axle bearing help - BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum
BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > Other tech issues

Other tech issues For all other technical issues. Think frame, suspension, steering, brakes, etc

 
 
Thread Tools
  #1  
Old 01-22-2018, 04:42 PM
wilit wilit is offline
Lurker
 

Join Date: Jan 2017
Posts: 4
Default Kandi 150FS rear axle bearing help

I'm in the process of replacing the rear axle and bearings on my son's Kandi. I was able to get the old bearings and housing removed from the old axle using a large modified 3-jaw puller. But in test fitting the new bearings on the new axle, they are definitely tight. Almost a press fit. I can slide it on about 1/8 of an inch before it stops and it takes some effort to remove it. What's the trick to getting these bearings on without destroying them or the axle? I've been debating on going over the axle with some 2000 grit paper and emory cloth to reduce the diameter a few thousands, but without a lathe, I'm a little worried it won't be round when I'm done.
  #2  
Old 03-03-2018, 04:09 PM
wilit wilit is offline
Lurker
 

Join Date: Jan 2017
Posts: 4
Default

Well, I figured it out. I ended up making a bearing press tool. In case anyone else needs help with this, here's how I made it.

The threads on the axle are a M16x1.5. You'll need the following items:

1. Axle nut
2. 5" length of M16x1.5 threaded rod (purchased from belmetric.com)
3. M16x1.5 female-female adapter (Purchased from Amazon)
4. 1-1/4" x 9" steel pipe w/threads
5. Pipe end cap (drill a hole in the center of the cap large enough for the threaded rod to fit through)
6. 1-1/4" washer


Next, thread the adapter onto the axle and thread the rod into the other end of the adapter. Slide the washer onto the axle, up against the bearing.


Thread the end cap onto the pipe, slide over the axle and the threaded rod through the hole in the end cap. Now screw on the axle nut and begin to tighten. Eventually the bearing will bottom out against the axle shoulder.

Last edited by wilit; 03-03-2018 at 04:12 PM.
  #3  
Old 03-04-2018, 06:46 AM
OLDKID's Avatar
OLDKID OLDKID is offline
Contributor
 

Join Date: Nov 2014
Location: Western N.Y.
Posts: 457
Cool

Nice !
__________________
2011 BMS KING COBRA 150 Sold
YERF DOG SPIDERBOX's Sold
YERF DOG 3203's. Sold
MANCO SILVER FOX. Sold
2009 POLARIS 500 HO SPORTSMAN 4X4
2002 POLARIS 500 HO SPORTSMAN 4X4
2000 POLARIS MAGNUM 2X4
HALF A DOZEN CHEVY 4X4's
NEED-MO-BUGGY
  #4  
Old 03-05-2018, 09:57 AM
scjeep4.7HO scjeep4.7HO is offline
Contributor
 

Join Date: Apr 2015
Location: Virginia
Posts: 197
Default

That great thinking.
  #5  
Old 03-06-2018, 06:44 PM
EVILWS6's Avatar
EVILWS6 EVILWS6 is offline
Contributor
 
Join Date: Aug 2015
Location: NE Ga.
Posts: 180
Default

Very good idea to press the axle bearings. Thanks for sharing.
__________________
2010 Carter Interceptor GTR 300
2010 Hammerhead 250 SS
2015 Kandi 49FM5 110cc
2015 Hammerhead GTS 250-SOLD
2008 Kazuma Coyote 150-SOLD
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:44 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.