yerf dog dont star

[gerber]

Hey guys my yerf dog wont to start is run perfectly and in the next day is dead i change te push botton, the spare,the solenoid,the starter,the battery and nothing is dead the only way to put it over is to put a screw driver in the solenoid please help me

[x-bird]

check the wires on the back of your starter switch, then check all your connections for corrosion etc.

[metalstudman1]

Did you check the brake safety switch under the seat? un-do the spring from the switch, pull & spin the end where the spring attached to the switch around.

[gerber]

Theres no swith under the sea and always start without put the brake and today is totally dead do not start no push botton no solenoid screwdiver nothing please help me

[metalstudman1]

We're assuming this is a Yerf #3206? is that right? Is the battery dead? For it to run one day & then not the next, chances are that all the electrical connections need to be un-plugged and cleaned. You've re-checked all the connections of the parts you changed and they're wired correctly? We're trying to help-

[gerber]

Yes 3206 no it runs fine i shutting down and in the next 5 minutes wont start