|
150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
|
Thread Tools |
#1
|
|||
|
|||
Basic wiring needed
I have an older Carbide 150, vandals ripped the wiring out and now I have a mess. Can anyone tell me what is the basic wiring needed to make it run? I do not need the lights/instruments etc. I just want the most basic wiring needed to run. I might be able to splice my wiring harness together, I just can't tell what goes where.
thanks Last edited by BigAl37; 01-25-2014 at 12:44 PM. |
#2
|
||||
|
||||
welcome bigal, a poster on here named 2slicknick has a carbide and may be able to help you.you can private message him or contact him through a post he has on the main screen about protective netting. zman
|
#3
|
||||
|
||||
Sent you a pm with the links. Hope that helps. I hate electrical problems and vandals.
__________________
Growing old is mandatory Growing up is optional https://www.youtube.com/watch?v=NEXoa-8d7qE |
#4
|
||||
|
||||
did you get anything figured out yet? or at least a start?
|
#5
|
|||
|
|||
I believe we have the wires back to where they belong, we still do not have a spark. From what I read I am guessing I will need a new CDI and coil
|
#6
|
||||
|
||||
Do you have a multimeter? There may be a bad ground wire somewhere. Does it turn over?
Maybe this will help http://www.youtube.com/watch?v=wbHSf...e_gdata_player Check that you have continuity with wires. The ground at the cvt cover commonly not always grounded properly. Check all grounds and fuses. Check continuity in coil wire.
__________________
Growing old is mandatory Growing up is optional https://www.youtube.com/watch?v=NEXoa-8d7qE |
#7
|
|||
|
|||
engine will turn over, checked the wires going to coil, no voltage when cranking. I do not know how to test the cdi unit
|
#8
|
||||
|
||||
Hope you figure it out, as I am no one for electrical problems.
__________________
Growing old is mandatory Growing up is optional https://www.youtube.com/watch?v=NEXoa-8d7qE |
#9
|
||||
|
||||
Go to the american sport works web site and download the 7150 engine manual. It will give you all the information yoy need to check the electrical.
|
|
|