|
Mini Buggy General Discussion General Discussion forum for Mini Buggies. (American Sportworks, HammerHead, Carter, etc) |
|
Thread Tools |
#1
|
||||
|
||||
MegaBuggy part 2!
Ok, the raptor engine is off of the old machine and here is what it will be going on:
If you have never seen one of these, this is called an Edge Sidewinder. Made by The Edge Products in Australia. Oh let the fun begin..... |
#2
|
||||
|
||||
I'll take two
__________________
asw carbide 1500 main and clutch springs HP clutch and bell koso variator performance cdi uni redneck intake fmf exaust 9gram rollers 39 tooth sprocket 140main and 40 pilot jet |
#3
|
||||
|
||||
love that color. if i ever repainted my hammerhead....green is the way to go!!
the brighter, the better. very nice looking ride.
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon) |
#4
|
||||
|
||||
sweet
__________________
http://www.youtube.com/watch?v=IUgir...ature=g-t=2668 FABRICATION ITS HARDER THAN YOU THINK |
#5
|
||||
|
||||
The Edge sidewinder is one of the best engineered and designed buggy chassis's out there. Did you find this local? I thought they only came in kit form. The only thing I disliked about them was that tacky marine gas tank they would bungy strap to the side rails . I guess that is a Aussie thing.
|
#6
|
||||
|
||||
Looks really great! You are definitively gonna have some fun with that one.
At this moment a guy over here in the Netherlands is also working on a buggy that looks similar to this one. He even repainted it in the same color green. Here's a vid of it testing the engine, sounds very impressive! http://www.youtube.com/watch?v=9RfhRnP8KHc |
#7
|
||||
|
||||
Ill take one, all matte black with some yellow accents! lol Im looking forward to a vid of this one!
|
#8
|
||||
|
||||
Here are a couple of progress pics. They are cameraphone pics but that's all I had at the time.
The new engine is in place. Lots and lots of stuff to do yet. |
#9
|
||||
|
||||
buggymaster
what does that motor weigh? what does the cart weigh? olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#10
|
||||
|
||||
ooohhhhhhh!
now i get it. sorry, it didn't sink in at first. "sidewinder'. i didn't really notice until now that the power plant is on the side rail. when i first looked at those pic's i was thinking "where the hell is he gonna fit the engine back there???? DUH! i'll catch up....carry on......
__________________
07 HH250SS UNI HIT CLUTCH DR. PULLEY VARIATOR RED MAIN 17g ROLLERS 12T/45T SPROCKETS IRIDIUM PLUG HP CDI & COIL LED LIGHTS ASW CARBIDE UNI 12g SLIDERS RED MAIN 39T SPROCKET (coming soon) |
#11
|
||||
|
||||
It's a fairly heavy machine but I don't have the specifics on it. I am not going to be having any tank on the other side. I need gravity fed so the plan as of now is to use one of the aluminum spun jobs on the rear somewhere. I'll figure that out when the time comes.
|
#12
|
||||
|
||||
That is a super nice ride can't wait to see how it turns out.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
#13
|
||||
|
||||
Here are some more update pics.
Here she sits on the middle of my now disasterous building. It amazes me at how quickly mahem sets in when doing something like this. You can see the battery mounted on the left side just behind the front fender. I'm happy I FINALLY found something to use this battery on. When I bought our HammerHead 400 Tiburon, the previous owner wouldn't spend the money on the correct battery and instead bought this beast and had it rigged into the HammerHead. Been sitting for a year and still good. Fits perfectly into the battery tray. If you look behind the seat, you can see where I mounted the electronics. Really the only things that have to be mounted are the CDI box, the rectifier, and the solenoid which I used from our blown up scrambler just because it was easier to mount. Along the right side (when seated) is where the wiring is bunched up for the time being but I plan on relocating that by extending the harness that goes to the shifter lever. The coil had a limited length on the spark plug wire so it had to go along the right side as well and will likely stay there. Other wise, the wiring appears to be done. One of the bigger challenges believe it or not was to get the paint matched. No way to get a hold of the original painters of this to ask them what paint is on it. After 5 cans of green paint that will likely never be used, I finally took a piece of metal with me to an auto paint shop and they did a remarkable job getting me a pretty correct color paint so I could pain the new motor mounts to match. The exhaust header is on but that will be dealt with in order to get it to the new muffler mounting position later. The oil tank is mounted and in place as well. In these next two shots you can see the muffler in its hopefully permanent home. We also utilized the polaris radiator from our blown up scrambler. Just better suited for the job. Lots more to be done. Still have to deal with the shifting (although I have a plan) and the throttle cable and a ton nic-nac items. I'll update again when I have more to update. |
#14
|
||||
|
||||
Outstanding!
|
#15
|
||||
|
||||
Gonna be a beast
__________________
Carbide: Uni Filter Iridium Sparkplug 1500 Main Spring 136 Main Jet Dr. Pulley Hit Clutch Dr. Pulley Variator Dr. Pulley 10-13 Slider Weights Four 55w Off Road Lights One 55w Reverse Light |
#16
|
||||
|
||||
Looks great! Keep up the good work, hope to see more of it.
|
#17
|
||||
|
||||
looking realy good
olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#18
|
||||
|
||||
Come on man....it's saturday, 4 days later, the weather is perfect....PLEEEEEEEEEEEEEEZE tell us you done had it out for at least a short test run....
|
#19
|
||||
|
||||
Well..the one problem with these kind of projects is they take a TON of time. Most of which is in waiting for parts. I'm slowly but surely getting more parts in. It's getting there though.
|
#20
|
||||
|
||||
it's alive.....video to come....
|
#21
|
||||
|
||||
Can't wait to see it.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU |
#22
|
||||
|
||||
still waiting on a run on the track
hurry olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far |
#23
|
||||
|
||||
0_o....
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! |
#24
|
||||
|
||||
???????
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils. |
#25
|
||||
|
||||
Just noticed this is an old post what the heck. Lol
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils. |
#26
|
|||
|
|||
do you have a video
__________________
Stock yerf dog 3203,1985 yamaha tri zinger with a aftermarket free flow fuel line an a uni air filter,2000 kasea sky hawk 150, baja doodle bug (sold), jetmoto 125, crappy 90 Chinese quad. |
#27
|
||||
|
||||
There is a video somewhere on our YouTube channel. I'll have to look and see if I can find it.
|
|
|