|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
 |
|
|
Thread Tools |
|
#1
05-27-2012, 01:09 PM
|
|||
|
|||
Throttle Problems
Hi, my 150cc coolster buggy is running great apart from the fact that when i accelerate, the throttle cable sticks on. Not good news, any suggestions on what the problem is? New throttle cable maybe? thanks
|
|
#2
05-27-2012, 08:57 PM
|
||||
|
||||
|
That's a problem you don't want to have!!!! cables seldom go bad, unless it's been kinked or water could get into it. Does the Coolster have a rod from the pedal? Is the curved metal shroud still in good shape at the carb?
Last edited by metalstudman1; 05-28-2012 at 10:45 AM.
|
|
#3
05-27-2012, 10:39 PM
|
||||
|
||||
|
Try lubing the cable.
One trick is to remove it and insert one end through the corner of a plastic bag, tie the corner of the bag up with a rubber band or a bread tie, etc. Put some motor oil in the bag and let it hang up overnight. The oil will drain through the cable and lube it properly. To do it quicker follow the instructions in these pictures. http://www.buggymasters.com/forum/al...pictureid=1585 http://www.buggymasters.com/forum/al...pictureid=1586 http://www.buggymasters.com/forum/al...pictureid=1587 http://www.buggymasters.com/forum/al...pictureid=1588
__________________
'07 Baja Reaction '05 Yerf 3206 Front end hangin' on by a shoestring  '07 roketa gk-17 -Chassis work in progress! '08 Crossfire 150R - It lives at last! 
Last edited by edroden; 05-27-2012 at 10:42 PM. Reason: Pictures not posting properly
|
|
#4
05-27-2012, 11:00 PM
|
||||
|
||||
|
Check your throttle stop on the carb. I have a cheap knock off carb, and the throttle stop is not as long as the original, so it actually will slip past the stop and "hang up"
Might wanna look into that.
|
|
|
|
