BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > ATV Dirt Bike and UTV Forums > ATV and Dirt Bike Forum

ATV and Dirt Bike Forum Forum for All ATV’s and Dirt Bikes

 
 
Thread Tools
  #1  
Old 04-05-2014, 10:46 PM
MASTERBATES's Avatar
MASTERBATES MASTERBATES is offline
Contributor
 

Join Date: Dec 2012
Location: Southern Illinios
Posts: 154
Default 97 trailblazer 250 2 stroke

got my hands on a trailblazer. the guy said he rode it last summer....well...maybe so. but top end insection says otherwise. these motors need to be AIRTIGHT to run properly and i found the clyinder bore to be egg shaped with alot of piston slap. crank is perfect with no up or down play, only slight side to side play. which is fine. its been torn into before due to the replaced wisco piston. just gonna turn it into a nickel and dime fund. i gotta buddy who will bore it for free for me , all i gotta come up with is a new piston and ring setup any opinions as to what brand to go with? right now im leaning towards a Namura piston package.
also note: its had the chain thrown before and broke the lower portion of the gearbox casing. it has been JB welded and appears not to leak.
__________________
MASTERBATES
TM 150 XRX-P&P head,A13cam,opened exhaust,140 main,38 pilot,adj cdi, perf coil,115mm variaitor,12 gm rollers,NCYpulley,2000 rpm springs,racing clutch,taller rear tires,and etc.
  #2  
Old 04-06-2014, 12:07 AM
Miamieddie's Avatar
Miamieddie Miamieddie is offline
Heavy Contributor
 

Join Date: Jan 2012
Location: miami. florida
Posts: 610
Default

Wisco is what I used on my banshees. They're light weight performance pistons. They seem good to me...I'm sure you have your reason not to use them though.
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils.
  #3  
Old 04-06-2014, 12:16 AM
Miamieddie's Avatar
Miamieddie Miamieddie is offline
Heavy Contributor
 

Join Date: Jan 2012
Location: miami. florida
Posts: 610
Default

One more thing I used mutol 800 to mix in the fuel. 4 ounces to each gallon. Oval shape piston? No telling what the p.o. did to it. But glad your able to take care of that at no charge...
__________________
2. 150cc carters. 1. Baja reaction 150cc dr2 variators Jerseydevil hp. Pipes unifilters gates belts. Yellow main springs hd. Orange coils.
  #4  
Old 04-06-2014, 09:48 AM
bear's Avatar
bear bear is offline
Senior Member
 

Join Date: Mar 2012
Location: cincy,ohio
Posts: 1,347
Default

Those were very torqy machines! what bore are you taking it too? I'm also a very big fan of the Wiseco's, as I run them in my Z1.
  #5  
Old 04-06-2014, 10:52 AM
MASTERBATES's Avatar
MASTERBATES MASTERBATES is offline
Contributor
 

Join Date: Dec 2012
Location: Southern Illinios
Posts: 154
Default

im not sure what i will take the bore to. but it will be the heart of a franken buggy for sure!
__________________
MASTERBATES
TM 150 XRX-P&P head,A13cam,opened exhaust,140 main,38 pilot,adj cdi, perf coil,115mm variaitor,12 gm rollers,NCYpulley,2000 rpm springs,racing clutch,taller rear tires,and etc.
  #6  
Old 04-06-2014, 04:59 PM
Masteryota's Avatar
Masteryota Masteryota is offline
Senior Member
 

Join Date: Dec 2012
Location: North Florida
Posts: 1,155
Default

+3 for Wiseco. For a frankenbuggy donor, I would always go forged. The forged kits are affordable and seem to last a long time. Dirt bike riders at the shop go both directions with these, the forged are less likely to distort, but the namura has a coating on the skirts that helps with cold starts.

If you don't mind, could you snap a pic or two of the gearbox? I have a trailblazer FNR box with the same chain damage. I am mostly looking for mounting tabs and orientation of the box in the frame.
__________________
ASE Master and Toyota Master Diagnostic Certified
Buggy Building Trainee

'04 Dazon Raider 150 'modded'

Last edited by Masteryota; 04-06-2014 at 05:06 PM.
  #7  
Old 08-02-2014, 07:31 AM
JERSEYDEVIL's Avatar
JERSEYDEVIL JERSEYDEVIL is offline
Supporting Vendor
 

Join Date: Feb 2011
Location: port charlotte fl
Posts: 831
Default


GO WISECO!
__________________

"LUCIFER" JOYNER JD400,
CROSSHAMMER 250R,
YERF GX150,
CROSSFIRE MBX150,
BMS 800V-TWIN
'16 RZR 900s ,
'17 ACE 900XC,
'99KX250,
'94 KDX200,
'18 SSR SR170TX

 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:20 PM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.