|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
 |
|
|
Thread Tools |
|
#1
11-13-2009, 01:45 PM
|
||||
|
||||
Uni Air Filter
I just got my box of parts from a supporting vendor. In that box was my Uni filter and velocity stack. I noticed there is small tube that ran from the old air filter box to the engine head. There is no port in the velocity stack with which to put that into. what do I do with that?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! 
|
|
#2
11-13-2009, 03:21 PM
|
||||
|
||||
|
nothin. its like oil return or somethin
just put a little screan on the tip and it'll work great!
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#3
11-13-2009, 03:45 PM
|
||||
|
||||
|
really?..... OK
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#4
11-13-2009, 04:17 PM
|
||||
|
||||
|
its what every one else does lol
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#5
11-13-2009, 06:09 PM
|
|||
|
|||
|
Evan's right - it's a breather tube, and from time to time some drops of oil may drip from it. If you ever find that a LOT of oil is coming out (frequent drips or God forbid a stream!), then something is wrong.
You can put one of the UNI breather hose filters we sell on it, or you can tie wrap it out of the way to the frame somewhere. Just don't block it off.
__________________
- Mike
|
|
#6
11-13-2009, 06:16 PM
|
||||
|
||||
|
Thanks for the info Mike.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#7
11-13-2009, 10:29 PM
|
||||
|
||||
|
That tube is realy a PCV tube. There are some that will drill and tap a fitting on there however you can just let it lie. Be sure to post up what you thing about the mods.
|
|
#8
11-13-2009, 10:41 PM
|
||||
|
||||
|
wow im like right for the first time~lol
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#9
11-13-2009, 10:42 PM
|
||||
|
||||
|
mines metal, but it would still be easy to do that to, and i will post about the mods. I might be going to turkey bay tomorrow... hopefully
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#10
11-13-2009, 10:45 PM
|
||||
|
||||
|
kewlio
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#11
11-13-2009, 10:47 PM
|
||||
|
||||
|
yeap
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#12
11-14-2009, 12:01 PM
|
||||
|
||||
|
I did what ****Mike suggested. A UNI Breather Hose Filter.
__________________
Thanks, PatNY 2008 HammerHead Super Sport 250cc 32mm Performance Pumper Carburetor Uni Filter Hammerhead Performance Exhaust 145 Main Jet 40 Pilot Jet 1/4 Fuel line Black MRP CDI MRP Performance Coil NGK Iridium Plug Dr.Pulley HIT Clutch White MRP Main Torque Spring Dr.Pulley Variator Dr.Pulley 19gr. Sliders Kenda Front Max 20 x 7-8 Interco Swamp Lite 22 x 11-10
|
|
|
|
