![]() |
![]() |
|
Electrical Tech General Tech for Electrical issues not related to specific engines (Lights etc) |
![]() |
|
Thread Tools |
#1
|
||||
|
||||
![]()
i put extra lights on a crossfire and wired them directly to the battery with a relayed fused switch. would the stock stator hold if they are only used for short periods at a time? only say 15 min of riding. just to get back to camp at night. i have replaced the stock headlights with led's and just want a bit more for a short ride.
|
#2
|
||||
|
||||
![]()
If you got led lights I think you will be ok.
|
#3
|
||||
|
||||
![]()
The added lights are 55 watt driving lights. The stock headlights are now LED. Should I use a second battery for the 55watt ones or will the stator handle them for a short time
|
#4
|
||||
|
||||
![]()
I doubt your stock stator will handle the 55 watts. I think the stockers (on my Yerf at least) used 35 watt. Plus you added LED to it also.
If you have or upgrade to a 11 pole stator set up, you should be fine then. You MAY even be good with an 8 pole set up, but I would doubt that. |
#5
|
||||
|
||||
![]()
xlint what is the worse that would happen? would it burn up the stator or just not recharge the battery?
|
#6
|
||||
|
||||
![]()
I imagine it would burn out the regulator
__________________
My Yerban assault vehicle: 2.2mm stroker crank, 62mm Nikasil cyl, Taida large vavle head, American made valve springs, ported intake manifold, TM 28mm carb, stock CDI, Bando coil, TK exhaust, stock CVT except for the 14g sliders, 13/40 internal gears, 16T drive, 31T axle sprocket, 22" rear tires, and ONE BIG POTATO CANNON mounted on top.......... |
![]() |
|
|