BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

Reply
 
Thread Tools
  #1  
Old 03-25-2012, 10:41 AM
Lyonsperf's Avatar
Lyonsperf Lyonsperf is offline
Contributor
 

Join Date: Sep 2011
Location: east haven CT
Posts: 170
Default 11 Pole Stator Wiring

My neighbor gave me an 11 pole stator from a gy6 his son was working on but lost interest. It has one plug with four wires colored Pink,Yellow,White and Green. It then has two free wires, 1 Blue and one Black with red.
He also gave me the matching rectifier that has two plugs. One plug has three yellow wires and the other has one pink and one green.

The plugs on these parts do not match so my question is what wires connect to what? I know the blue wire is the pickup to cdi and the black with red is the cdi power. But how does the pink,yellow,white and green connect with the three yellows, pink and green of the rectifier?
__________________
If the only tool you have is a hammer,

Then all your problems look like nails.
Reply With Quote
  #2  
Old 03-25-2012, 11:22 AM
metalstudman1's Avatar
metalstudman1 metalstudman1 is offline
Super Moderator
 

Join Date: Aug 2009
Location: Belmont,NC (elevation 534')
Posts: 2,668
Default

Can you take a pic of the stator?-usually you can trace the wires back to the windings to figure it out.
Reply With Quote
  #3  
Old 03-25-2012, 01:47 PM
Lyonsperf's Avatar
Lyonsperf Lyonsperf is offline
Contributor
 

Join Date: Sep 2011
Location: east haven CT
Posts: 170
Default

stator.jpg

This is a pic of the stator I have. The actual one is already installed with the flywheel.
This is the rectifier.gy6statorregulatorrectifier.jpg
__________________
If the only tool you have is a hammer,

Then all your problems look like nails.
Reply With Quote
  #4  
Old 03-25-2012, 10:13 PM
xlint89's Avatar
xlint89 xlint89 is offline
Senior Member
 

Join Date: Dec 2011
Location: cleveland OH
Posts: 1,064
Default

Have you checked the link at BD for the 11 pole?

This site won't allow me to post it.
Reply With Quote
  #5  
Old 03-26-2012, 07:41 PM
Lyonsperf's Avatar
Lyonsperf Lyonsperf is offline
Contributor
 

Join Date: Sep 2011
Location: east haven CT
Posts: 170
Default

OK got it figured out.
For future reference the 11 pole stator can have 3 yellows and a green or 1 pink, 1,yellow, 1 white and 1 green. The green is the ground on both. You should connect the other three to the 3 yellows coming from the rectifier. The rectifier wires go: pink goes to battery + and the green goes to ground.
__________________
If the only tool you have is a hammer,

Then all your problems look like nails.
Reply With Quote
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:28 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.