|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
 |
|
|
Thread Tools |
|
#1
03-21-2010, 09:27 PM
|
||||
|
||||
Looks like I'm going aftermarket
So it looks like I might be going with an aftermarket exhaust and I was wondering what the best ones were. Right now my budget's about $200.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE! 
|
|
#2
03-22-2010, 12:25 AM
|
||||
|
||||
|
Honestly, I was really happy with the FMF universal we had on our Helix. Sounded great.
|
|
#3
03-22-2010, 02:30 AM
|
||||
|
||||
|
There are a lot of fmf mufflers on ebay going cheap at the moment just type in fmf muffler and you will see a lot. You can pic one up and have it welded t your local muffler shop for around $10-20 and it will leave you with some money leftover for more goodies, maybe even a port and polish or cam to get a little more power. Good Luck.
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU
|
|
#4
03-22-2010, 11:14 AM
|
||||
|
||||
|
I saw a lot of pipes on ebay. Can someone find one that will fit?
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#5
03-22-2010, 12:56 PM
|
||||
|
||||
|
Any should work worse case scenario buy an adaptor fitting from your local parts store but most of the 50cc up to 250cc ones are right around 1-1/8" to 1-1/4".
__________________
09 Joyner Sand Viper 250 08 Joyner Sand Viper 250 2009 Joylaris 400 Screamer http://www.youtube.com/watch?v=eeulR4W1_PU
|
|
#6
03-22-2010, 12:58 PM
|
||||
|
||||
|
Ok. It looks like I'm buying a HH 150 exhaust for a certain website.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#7
03-22-2010, 01:19 PM
|
||||
|
||||
|
josh
pm me and tell me about this exhaust olderthan
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far
|
|
#8
03-23-2010, 09:29 PM
|
||||
|
||||
|
bigs has a hammerhead exhaust on his baha 150 sounds real good but it a tad loud at times, especially if you are in a neighborhood or like to ride at night. he was actually thinking about making a silencer for his.
|
|
#9
03-24-2010, 12:18 PM
|
||||
|
||||
|
Loudness is ok because I wont be doing much night riding and even though I live in a neighborhood, that's also ok because it's in the country and no one out here cares.
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
#10
03-24-2010, 04:46 PM
|
||||
|
||||
Quote:
__________________
MY HELIX -20' maxxis tires -1 1/2in.UNI air filter -gutted exaust -extended lugs -headlights -reflectors -my stickers -adjusted suspension -ground out hubs (to fit on the tires) helix 150
|
|
#11
03-24-2010, 04:47 PM
|
||||
|
||||
|
Yeah
__________________
-JoshMy Ride: ASW Carbide Mods: Dr. Pulley Hit Clutch FMF Slip-On Exhaust No Rev. CDI Uni Air Filter 130 Main jet 1500 RPM main clutch spring 11g sliders 75w Halogen Headlights CARBIDE!
|
|
|
|
