BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 07-27-2020, 07:40 PM
Shawn Stennett Shawn Stennett is offline
Lurker
 

Join Date: Jul 2020
Posts: 2
Default Kandi 200 Batman

I am a bit confused, I just bought a Kandi Batman 200, and it is already broke. My kids broke it lol not the seller. I don’t have any information except for looking up the engine code. It does show to be a 200 cc GY6 but I can’t find any thing for it. Everything that is upgrades or parts beyond basics are all listed for 150 cc. Also which part of this forum do I belong in? 150 and down or 250 and up, seems to be a space between there lol.
  #2  
Old 08-04-2020, 01:37 AM
plee911's Avatar
plee911 plee911 is offline
Contributor
 

Join Date: Feb 2018
Location: Arizona
Posts: 173
Default

Not sure for your model but alot of buggies that are listed as 200 are actually 150s

Check your motor left side down near the bottom you should find a letter code
something like 157qmj or 1P57qmj
your might find something like 163qmj but it will be something like that.

If it is 157 or 1p57 then you have a 150CC
__________________
Where there is a red neck there is a way.
  #3  
Old 08-04-2020, 05:48 AM
Shawn Stennett Shawn Stennett is offline
Lurker
 

Join Date: Jul 2020
Posts: 2
Default

It does have 1P63QML On the motor so I was going on the assumption that it has the 63mm bore and would be 200 cc. So the problem is I don’t know what will work for it as far as upgrades. I would like to upgrade the CVT but does the GY6 150 kit work with it?
  #4  
Old 08-05-2020, 01:05 AM
plee911's Avatar
plee911 plee911 is offline
Contributor
 

Join Date: Feb 2018
Location: Arizona
Posts: 173
Default

My bet is that its a modified 150. which is great the 150 stuff should fit just fine.
1p63 means it has the 63 MM bore just as you said. pretty much everything else will be the same as on a 150.
__________________
Where there is a red neck there is a way.
  #5  
Old 06-02-2021, 11:52 AM
BEEFKING69's Avatar
BEEFKING69 BEEFKING69 is offline
Contributor
 

Join Date: Jun 2015
Location: Blountstown, Fl
Posts: 364
Default

I know this thread is old but for future reference the 1p63qmj is a completely different variation of the gy6 and has basically nothing in common with a normal gy6.

First theres now 4 types of gy6s for buggys...Standard A-block....B-block...K-block....sym 150...and this 1p63qml. All have different stud spacing and share few parts between each other.

The 1p63qml is 62.5mm bore which makes it 177cc.
It has a completely different head bolt spacing.
It has a taller head with a 47/94 link/pin timing chain.
It has a counterbalance shaft.
It has an oil cooler.
Standard gy6 cams fit but i havent tried to run it with a standard or performance cam yet.
Parts are extremely hard to find.
__________________
Buggy Dealer
Crossfire 250r IRS (400cc swap in progress)
Crossfire 250r (SYM 250)
HH250SS..RIP (IRS donor for the crossfire)
HammerHead 150
Gs Moon buggy 150
Many other random parts buggys (still never have what im needing tho :/ )
  #6  
Old 11-04-2023, 12:18 PM
hardtofind1 hardtofind1 is offline
Lurker
 

Join Date: Nov 2023
Posts: 2
Default 1P63QML Rocker Arm assembly

I know this is an older thread - sorry to dig it up - I bought a second hand buggy for my kid and had to redo the top end - putting it together i realized the exhaust rocker arm was seized. For th elife of me i cannot source one. Any ideas on a reseller that i can get one from? I know its an oddball engine
  #7  
Old 11-04-2023, 12:20 PM
hardtofind1 hardtofind1 is offline
Lurker
 

Join Date: Nov 2023
Posts: 2
Default 1P63QML Rocker Arm assembly

Quote:
Originally Posted by BEEFKING69 View Post
I know this thread is old but for future reference the 1p63qmj is a completely different variation of the gy6 and has basically nothing in common with a normal gy6.

First theres now 4 types of gy6s for buggys...Standard A-block....B-block...K-block....sym 150...and this 1p63qml. All have different stud spacing and share few parts between each other.

The 1p63qml is 62.5mm bore which makes it 177cc.
It has a completely different head bolt spacing.
It has a taller head with a 47/94 link/pin timing chain.
It has a counterbalance shaft.
It has an oil cooler.
Standard gy6 cams fit but i havent tried to run it with a standard or performance cam yet.
Parts are extremely hard to find.


1P63QML Rocker Arm assembly
I know this is an older thread - sorry to dig it up - I bought a second hand buggy for my kid and had to redo the top end - putting it together i realized the exhaust rocker arm was seized. For th elife of me i cannot source one. Any ideas on a reseller that i can get one from? I know its an oddball engine
  #8  
Old 11-18-2023, 01:13 AM
BEEFKING69's Avatar
BEEFKING69 BEEFKING69 is offline
Contributor
 

Join Date: Jun 2015
Location: Blountstown, Fl
Posts: 364
Default

Quote:
Originally Posted by hardtofind1 View Post
1P63QML Rocker Arm assembly
I know this is an older thread - sorry to dig it up - I bought a second hand buggy for my kid and had to redo the top end - putting it together i realized the exhaust rocker arm was seized. For th elife of me i cannot source one. Any ideas on a reseller that i can get one from? I know its an oddball engine
Hey buddy. Not right off hand i dont. There was a seller on ebay that had a bunch of these parts but as of now his store seems empty. Amazon has heads and cylinders but no cams or rockers.
__________________
Buggy Dealer
Crossfire 250r IRS (400cc swap in progress)
Crossfire 250r (SYM 250)
HH250SS..RIP (IRS donor for the crossfire)
HammerHead 150
Gs Moon buggy 150
Many other random parts buggys (still never have what im needing tho :/ )
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:29 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.