BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum

Go Back   BuggyMasters.Com - An On Line Mini Buggy Forum and Go Kart Forum > Technical Discussions > 150cc GY6 and Under Engine Tech

150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum

 
 
Thread Tools
  #1  
Old 07-20-2020, 11:32 AM
Papa Tom Papa Tom is offline
Lurker
 

Join Date: Jun 2020
Location: Kansas City
Posts: 15
Default Fuse size in harness to Starter

What size of fuse should be in the harness that goes to the starter?
Currently there is a 10 amp fuse there but it is blowing out at times.
  #2  
Old 07-21-2020, 12:23 AM
plee911's Avatar
plee911 plee911 is offline
Contributor
 

Join Date: Feb 2018
Location: Arizona
Posts: 173
Default

10 amp is normal dont go to a bigger size you have a short somewhere that your going to have to track down. I made the mistake of going to a bigger size trying to track a short and melted a bunch of wires that i had just redone. you can also get a 10amp relay that way when it trips it resets itself. It wont fix the problem but it will make it less of a head ache. It will take time to track down the short but take your time and inspect everything.
__________________
Where there is a red neck there is a way.
  #3  
Old 08-23-2020, 12:14 PM
SYCARMS's Avatar
SYCARMS SYCARMS is offline
Supporting Vendor
 

Join Date: Sep 2009
Location: Senatobia, Mississippi
Posts: 3,375
Default

You just have to go through all wiring looking for a temp short or bad ground. Also check all plugs. Many times the pins may not be installed right barely making contact which will really heat up a circuit just as corrosion will do.
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:19 AM.


Powered by vBulletin® Version 3.8.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.