|
|
|
|||||||
| 150cc GY6 and Under Engine Tech GY6 and Smaller Technical Discussion Forum |
 |
|
|
Thread Tools |
|
#1
07-09-2010, 09:43 PM
|
|||
|
|||
New member w/ new buggy
Hey guys, I just bought my boys a used 150cc buggy. The previous owner didn't know the make and there is no stickers on the frame anywhere of what it could be. I'm including a pic of the buggy to see if anyone knows what it is. My question for everyone is, the reverse cable needs to be adjusted because it won't go into reverse. The cable at the rear of the buggy is extremely loose. If I pull on the cable there it will go into gear. Here is a pic of the cable. It seems like there is something missing. Any ideas? I'm not sure whats needed. Thanks
 
|
|
#2
07-09-2010, 10:58 PM
|
|||
|
|||
|
bump
|
|
#3
07-10-2010, 04:50 AM
|
||||
|
||||
|
thos buggys were brought in to the U.S under alot of names, the reverse cable is missing the sleeve that the cable screws intoand then slides over the shaft, last time I checked they were on back order, but have to call on monday to order some more parts and I will check again
|
|
#4
07-10-2010, 07:04 AM
|
|||
|
|||
|
Do you know the correct name for the sleeve? I've been checking online but haven't come up w/ nothing.
|
|
#6
07-10-2010, 07:51 AM
|
||||
|
||||
|
in the green color
could have been sold by someone like bass pro or gander mountain
__________________
olderthan 2008 tomberline punisher 1500 spring 12g sliders 30mm cv pumper carb uni filter no rev cdi polaris xlt snowmobile shocks for front w/550 magnum springs & blaster fronts on rear and another buggy built working on mods gk-13 white spring 17 gram sliders so far
|
|
#7
07-10-2010, 03:03 PM
|
|||
|
|||
|
I can't find anything online under shift yoke sleeve. Will I be able to buy one by itself? Could I possibly make one?
|
|
#9
07-26-2010, 10:06 AM
|
||||
|
||||
|
That thar is a shift yoke cover you're in need of. (See red arrow my on pic.)
I used to have a link saved from a parts dealer for my type pictured, and wouldn't ya know I can't find it. But from the looks of your pic it looks like your missing some grooves for allen screws and a lil different set up on the reverse gearbox. Maybe this one here. Any way once you get the sleeve, cover, spacer whatever in place, it will take up the slack you're needing for reverse. Last edited by JakeTheSnake; 07-26-2010 at 12:02 PM. Reason: spelling
|
|
#10
07-26-2010, 10:09 AM
|
||||
|
||||
|
Oh dang I forgot to say Welcome to the group! lol
|
|
|
|
